Showing posts with label error. Show all posts
Showing posts with label error. Show all posts
Friday, March 17, 2017
Windows 8 PC Black Screen at Startup and Boot BCD Error
Windows 8 PC Black Screen at Startup and Boot BCD Error
The Following Windows 8 Error:
- This PC loads with black screen and it stay there
- your pc needs to be repaired - boot bcd and error code:0x0000034
The problem of the computer hangs during loading process of Windows 8 and its just stay there. The thing you can see is the mouse pointer. The only thing you can do is turn off the computer by holding the power button.
Read the full article of this Windows 8 error
Available link for download
Sunday, February 19, 2017
Video Tomtec Tablet Hangs at Android Startup Error
Video Tomtec Tablet Hangs at Android Startup Error
According to the web forum, the solution of this proble is just press the reset button. I tried this solution but it does not work. Holding the menu, power button, up and down volume does not work.
Available link for download
Wednesday, January 4, 2017
Windows Update error 0x80070490
Windows Update error 0x80070490
When you use Windows Update or Microsoft Update to install updates, you may receive error 0x80070490, if the Component-Based Servicing (CBS) manifest is corrupted.
Resolution
Windows 8.1 or Windows 8
Step 1: Use System File Checker to repair damaged Windows files
Use the System File Checker tool to repair damaged Windows files. To do this, follow these steps:- Open an elevated command prompt.
- Run the "sfc /scannow" command.
- Try to install update again.
Step 2: Run the DISM tool
If the problem continues, use the Deployment Image Servicing and Management (DISM) tool to fix Windows Update corruption errors. To do this, follow these steps:- Open an elevated command prompt.
- Run the "DISM.exe /Online /Cleanup-image /Restorehealth" command.
Important When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccessNote Replace the C:RepairSourceWindows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows, reference Repair a Windows Image.
Windows 7 or Windows Vista
Step 1: Use System File Checker to repair damaged Windows files
Use the System File Checker tool to repair damaged Windows files. To do this, follow these steps:- Open an elevated command prompt.
- Run the "sfc /scannow" command.
- Try to install update again.
Step 2: Run the System Update Readiness tool
If the problem continues, use the System Update Readiness tool to fix Windows corruption errors.Windows XP
Use the System File Checker tool to repair damaged Windows files. To do this, follow these steps:
- Open an elevated command prompt.
- Run the "sfc /scannow" command.
- Try to install update again.
Available link for download
Monday, January 2, 2017
Windows Update error 80246002
Windows Update error 80246002
This error started appearing in Windows 7 a few days ago, some say due to the update KB2982791 (unconfirmed yet).
If you were affected by this error - heres how to fix it (so far).
First of all - what doesnt work:
- Uninstalling the KB2982791 update.
- Deleting the SoftwareDistribution folder contents inside the Windows folder (this used to work for me in previous Windows Update errors).
- Renaming the Download subfolder of the SoftwareDistribution folder.
- Restoring the system to an earlier state may not fix this problem.
- Running the Windows Update Troubleshooter may not fix this problem.
- Applying the KB947821 patch may not fix this problem.
What does work (confirmed by many cases, including my own experience with this error):
You need to manually set the DNS addresses (of a well known public DNS server, such as Google DNS) for your network connection to successfully get rid of the update error.
1. Go to Network and Sharing center inside Control Panel.
2. Click "Change Adapter Settings" on the left side pane.
3. Right click the network connection youre currently using to be connected to the internet.
4. Choose Properties.
5. Double click "Internet Protocol Version 4 (Tcp/IPv4)"
6. Change "Obtain DNS Server Address automatically" to "Use the following DNS server addresses" - enter 8.8.8.8 as Preferred DNS server, and 8.8.4.4 as Alternate DNS server.
7. OK all of the windows.
8. Now either restart the machine and check your updates again, or run the ipconfig /flushdns command inside the command prompt in elevated mode.
After this procedure - Windows Update should start searching for updates, it will take a while, so be patient. Eventually you will be presented either with more updates, or the statement that there are no newer updates.
Available link for download
Wednesday, December 28, 2016
The Epson Stylus Photo and Artisan 50 Printer General Error Solution
The Epson Stylus Photo and Artisan 50 Printer General Error Solution
The General Error Problem applies to the following Epson Stylus Photo Printer Model:
- Epson Stylus Photo T60
- Epson Stylus Photo R290
- Epson Stylus Photo R285
- Epson Stylus Photo R280
- Epson Stylus Photo R270
- Epson Stylus Photo P50
- Epson Artisan 50
- Epson Stylus Photo R260
Epson Artisan and Epson Photo General Error problem
When the general error occurs, upon turning on the printer. The ink button and the paper button blinks (red blink) simultaneously while the power button is off. Dont be confused to the alternate red blinking! The alternate red blinking is different problem and can be fix without getting your hands dirty.
To be sure if the problem is General Error and not the End of Service life error (the resetting of Epson Counter using the utility of Epson) . Turn on the computer where the Epson 6 colors printer is connected and print one copy of documents or a test print.
The status monitor will display one of the following:
Status Monitor (Software) - Printer Buttons Hardware
- General Error - Red light of paper button and ink button blinking simultaneously. Power button is off
- Near end of Service life - Power on button lights green and continue printing. Paper button and ink button is off
- End of service life - Red light of paper button and ink button blinking alternately - Power on Button is off
- One or two out of 6 colors Mark with X
- Original Epson Cartridge - means the printer is out of ink
- Manual Reset CIS - need to push the reset button up to 10 seconds
- Automatic Reset CIS - turn off printer and turn on again
- DVD tray open - Power on lights green while paper button and ink button alternately blinking
- Paper Jam - turn off the printer and turn on again
- CIS Hose - Hose too long or touching the metal
Causes and Solution General Error problem
The cause of this error are:1. Paper Sensor
It is located besides printer head. You can access this area by completely disassembling the whole printer.
Problem
- the sensor is full of dirt or dust
- the sensor is soak with ink
- dust blocked the sensor
- Disassemble and Remove the Sensor inside the printer
- Clean using tissue or cloth
- Rinse the with tap water and blow dry it
- clean the end of the ribbon connected to sensor
- Replace the Sensor
2. The Belt
it is located around|back of the printer head, where we put the paper. the responsible of holding and moving the head from left to right and back and forth.
Problem
- The belt might cut
Solution
- Replace the paper feeder or fix it
- Replace the belt
Before replacing the belt. Double check if the paper feeder of the said printer is working properly. The reason why the belt is cut because it wants to feed the paper but it cant get it.
Additional Tips: Dont remove the printer head if there is no trouble youve encounter , removing the printer head of this printer is so sensitive. One mistake of pulling and reinserting the 6 colors printer head cable makes your printer entirely useless
Available link for download
Thursday, December 22, 2016
Windows 7 Error code 0x80070570 During Operating System Installation
Windows 7 Error code 0x80070570 During Operating System Installation
Windows cannot copy files required for installation. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570 applies to Windows 7, Windows 8 and Windows 8.1 operating System.
The error means that the installer files located in optical disk or USB drive is corrupted/ damage. It also indicate that the hard disk drive have a trouble, just try to reset the drive by using the following manufacturer tools
- For Seagate hard disk drive
- For Western Digital hard disk drive
- For Hitachi brand hard disk rive
The fix of the Windows installation error code 0x80070570 are the following
- When using DVD during installation, be sure the optical disk drive can read properly
- Change DVD Installer Disc
- If using USB Storage device, try to reformat the USB flash drive and re-create the bootable USB
- Use another USB Flash drive and create again a Windows Operating System bootable USB
The Error code: 0x80070570 appear with a following message like this
The installation was cancelled. Any changes that were made to your computer during installation process will not be saved.
Windows Cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570
Available link for download
Thursday, November 3, 2016
The Selected Disk has and MBR Partition Table Windows can Only be Installed to GPT Disk Error
The Selected Disk has and MBR Partition Table Windows can Only be Installed to GPT Disk Error
In the picture below it appears that the problem occurs during the installation of Windows 7. In this action the existing partition of disk is deleted. Then create a partition but when installing the Windows Operating System the message “Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks".
With this error it means that the existing partition layout of the Hard disk drive is not compatible to Windows 7 Operating system. To fix this problem you have to convert the disk drive layout to GPT.
The difference of MBR and GPT
MBR disks have 1 partition table to keep track of all the blocks in the partition. If the table becomes corrupt, the entire disk must be recovered from backup.While Windows GPT-based disks have multiple, redundant partition tables so that if one is detected as being corrupt, it can self-heal itself from a redundant copy of the table.
Click the Link Below for Next Troubleshooting
- GPT Disk VS MBR Disk Partition Overview
- Guide for Converting MBR Disk to GPT Disk and Install Windows Operating System
Available link for download
Subscribe to:
Posts (Atom)